4 Wire Transmitter - W,X,Y,Z
The flow meter is available with three output signals a 4-20mA output (Option W), a 0-1000 Hz frequency (Option Y), set point switching (Option X) and Option Z which combines W, X, &Y for interfacing with controllers, computers and alarms. The output signal is linear.
Standard Optional
Accuracy:
Horizontal Flow: ¡¾ 3% above 30% F.S.
Vertical Flow: ¡¾ 5% above 30% F.S.
Repeatability: ¡¾ 1% F.S.
Pressure Max.: 180 psig (12.6 kg/cm©÷) 400 psig (28.1 kg/cm©÷)
Pressure Min.: 10 psig (0.67 kg/cm©÷) 10 psig (0.67 kg/cm©÷)
Temp. Max.: 212¨¬F (100¨¬C) N/A
Temp. Min.: -30¨¬F (-34¨¬C) N/A
Electrical Rating:
Ambient Temp.: 120¨¬F (50¨¬C)
Current Output: 4-20mA into 800 ohms max.
Contact Rating: 3.0 amp @ 24V
1.0 amp @ 117V
0.5 amp @ 230V
Frequency Output: 1000 Hz F.S. 5 V Peak, 270 µs on time
Requirement:
Power Input: 100mA, 24Vdc per meter (Not Included)
Protect from freezing liquid
Construction Specifications:
Housing: Super ABS Aluminum
Body: Bronze Monel, 316SST
Bellows: Bronze Monel, 316 SST, Inconel
Seals: Buna-N Viton, EPR, Teflon
Crystal: Polycarbonate Glass, Plastic
Gear Movement: Brass 316 SST
A Viton Seals
B EPR Seals
B2 Teflon Seals
C Calibrated for Specific Gravity
D Gasketed Case (NEMA 4X, IP66 ABS only)
D2 Gasketed Case w / Condulet (NEMA 4X IP66)
E Non-Standard Flow Rate
ES Low Rate (Below 2 GPM)
F Aluminum Housing w / Plastic Dial Crystal
F2 Aluminum Housing w / Glass Dial Crystal
G Custom Scales and Dials
H High Pressure Service
I Compressed Gas Service
J Peak Flow Indicator (ABS Housing Only)
P Panel Mount
R2 Remote Readout, Bronze
R3 Remote Readout, 316 SST
V High Viscosity Service
W 4-20mA Linear Output Signal
X Hi / Lo Alarm Relays
Y 0-1000 Hz Frequency Output Signal
Z Combination of Options W, X, &Y
-EM Electromagnetic Compatibility ( 89/336/EEC)
(Aluminum Housing Only)
Á¦Á¶»ç :